At the West Warwick AMTROL manufacturing facility, nine production lines produce metal tanks for plumbing, heating, Freon, propane and water storage on a seven- acre site. Tank production involves punch forming, hole punching, welding, grooving, assembling, testing, buffing, etching, painting and packaging.<\/p>\n
Responsible Waste Processing in Manufacturing Process<\/h2>\n
![\"Sludge](\"https:\/\/cogentcompanies.com\/wp-content\/uploads\/sites\/25\/sludge-cakes.jpg\")
As in all manufacturing processes of this type, various kinds of waste products are generated in each step that must be collected and disposed of properly.\u00a0 At the West Warwick facility, the largest quantity of waste generated is metal particulates containing primarily iron hydroxide, along with carbon steel, copper, brass, zinc, caustic acid and alkaline chemicals.<\/p>\n
Processing of this waste begins by collecting the particulates and chemicals in slurry tanks for pre-treatment to separate oils and neutralize caustic components. Wilden AODD pumps then transfer the resulting sludge to holding tanks in a laboratory for final processing by three large recently installed filter presses to separate the sludge into solids and water for proper disposal. Each filter press has eight two inch wide chambers, and each chamber is equipped with two 24-inch by 24-inch membrane plates.<\/p>\n
To facilitate the process, three Wilden AODD pumps are used to pump the waste-laden sludge into the filter press chambers. AMTROL utilizes Wilden AODD pumps exclusively for all fluid-transfer applications at its manufacturing facilities, including filter presses because of their proven effectiveness in a variety of demanding applications.<\/p>\n
The treated sludge containing water and metal particulate waste is pumped into the chambers until they become full with solid \u201csludge cakes\u201d formed from the concentrated waste. During the process, water in the sludge is separated from the waste materials as it is filtered through the filter press membranes. Upon exiting the membranes, the now clean water is disposed of in the municipal sewer system while \u201csludge cakes\u201d drop into a bin to be carried away for disposal.<\/p>\n
Overall, the facility\u2019s filter presses process up to 9,600 gallons (36,340 liters) of waste sludge per day and produce more than 100 tons of \u201csludge cakes\u201d per year.<\/p>\n
![\"Sludge](\"https:\/\/cogentcompanies.com\/wp-content\/uploads\/sites\/25\/sludge-volume.jpg\")
<\/p>\n
Waste Processing Improvement<\/h2>\n
While AMTROL\u2019s 30-year-old Wilden M8 AODD pumps had been faithful workhorses over the years, their older technology was a limiting factor in utilizing the potential of the new filter press.<\/p>\n
A crucial part of an AODD pump is the Air Distribution System (ADS). This component directs pressurized air to the diaphragms that convert it into mechanical motion that push and retract the pump\u2019s diaphragms, causing it to pump fluid. AMTROL was using 30-year-old Wilden M8 AODD pumps equipped with ADS technology also dating back more than three decades. The age of these pumps and ADS units under the demanding conditions of the filter presses resulted in periodic waste processing halts and downtime for pump disassembly, repair, reassembly and restarting. While the Wilden AODD pumps were the best technology for the filter press, a newer solution for ADS reliability was needed.<\/p>\n
AMTROL didn\u2019t need to look far for a solution. By replacing the 30-year-old ADS technology with the revolutionary Wilden Pro-Flo SHIFT ADS, they were able to reduce the downtime of their AODD pumps, streamline the waste-management process, conserve energy, save money and reduce the total cost of ownership, all at the same time.<\/p>\n
\u201cPump stalling was a problem,\u201d said AMTROL Environmental and Production Manager Bob Perrotti.\u00a0 \u201cBecause the new filter presses were automated, they operated mostly unattended. As a result, if a pump stalled, it may not be discovered for a long period of time during which no waste was processed. While our existing Wilden pumps had provided us with great performance throughout the plant over the past 30 years, the older ADS technology was clearly the weak link in the new filter press process.\u201d<\/p>\n
AMTROL installed new Wilden PS8 50-mm (2-inch) Original\u00ae Series clamped AODD pumps equipped with the Pro-Flo SHIFT ADS and immediately noticed improved pump reliability.<\/p>\n
\u201cThe results were astounding,\u201d said Perrotti. \u201cThe Pro-Flo SHIFT eliminated all mid-process stalling. Now, when a pump is not running, we know that the filter press\u2019 chambers are full. This incredible leap in ADS technology solved several major issues. The additional unexpected benefit was decreased maintenance. Because the SHIFT doesn\u2019t need oil, the bothersome maintenance tasks of monitoring ADS-unit oil levels and adding it when they run low has been eliminated. In addition, we\u2019ve cut maintenance costs considerably since we no longer need to disassemble the pumps in order to restart them every time they stall.\u201d<\/p>\n
![\"Wilden](\"https:\/\/cogentcompanies.com\/wp-content\/uploads\/sites\/25\/wilden-proflo-replacement.jpg\")
AMTROL Paint and Environmental Supervisor Josh Hytinen commented, \u201cThe Pro-Flo SHIFT also increased our efficiency. Our cycle time has been reduced by nearly 40 percent, so we can expand our waste-processing capacity without additional equipment. The SHIFT has been a major benefit in improving our waste-processing capabilities without major capital investments.\u201d<\/p>\n
The secret to the Wilden Pro-Flo SHIFT\u2019s revolutionary operation is a unique air control spool that automatically meters the air and prevents overfilling without reducing performance. By limiting the air used to the amount needed to maintain the pumping process, air consumption is lowered by up to 60%. The result is more product yield per standard cubic foot per minute of air consumption for maximum operational efficiency and energy savings. The Pro-Flo SHIFT technology also increases pump reliability for added maintenance savings. In addition, the Wilden Pro-Flo SHIFT can be retrofitted to existing Wilden AODD pumps to improve performance while retaining the original pump investment.<\/p>\n
Conclusion<\/strong><\/p>\n As operations at AMTROL\u2019s West Warwick facility continue to expand, the enhanced reliability and processing capacity of its filter presses will be key in handling the increasing volume of waste products efficiently, cost effectively and on schedule. For AMTRO, the Wilden Pro-Flo SHIFT ADS will play a key role in assuring optimum filter-press operation with its ability to deliver the required power, reliability and efficiency in high-demand operations such as filter presses.<\/p>\nDownload Full Article<\/span><\/a>\n<\/span>\nContact Edelmann for Selection Assistance<\/span><\/a>\n This article was written by Kevin Hogue as a Regional Manager for Wilden\u00ae.<\/em><\/p>\n","protected":false},"excerpt":{"rendered":" How did a tank manufacturer improve filter press reliability and efficiency with Wilden Pro-Flo Shift AODD Pumps, improving waste processing yield 40% and cutting operating costs 60% ? AMTROL\u2019s West Warwick, RI, USA, manufacturing facility produces metal tanks for plumbing, heating, Freon, propane and water storage generating metal particulate waste that requires safe, efficient, economical […]<\/p>\n","protected":false},"author":20,"featured_media":103981,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_monsterinsights_skip_tracking":false,"_monsterinsights_sitenote_active":false,"_monsterinsights_sitenote_note":"","_monsterinsights_sitenote_category":0,"footnotes":""},"categories":[1,1835],"tags":[],"class_list":["post-103975","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-pump-articles","category-wilden-pump-articles"],"acf":[],"featured_image_src":{"landsacpe":["https:\/\/cogentcompanies.com\/edelmann\/wp-content\/uploads\/sites\/25\/sludge-cakes.jpg",466,524,false],"list":["https:\/\/cogentcompanies.com\/edelmann\/wp-content\/uploads\/sites\/25\/sludge-cakes.jpg",466,524,false],"medium":["https:\/\/cogentcompanies.com\/edelmann\/wp-content\/uploads\/sites\/25\/sludge-cakes-249x280.jpg",249,280,true],"full":["https:\/\/cogentcompanies.com\/edelmann\/wp-content\/uploads\/sites\/25\/sludge-cakes.jpg",466,524,false]},"yoast_head":"\n